Sanghvi Electronics

We are engaged in offering 5Shx2645L0004 Igct Thyristor to our clients. Our range of all products is widely appreciated by our clients.

1. General Overview

• Type: Power rectifier diode module

• Configuration: Single diode module

• Technology: Standard recovery rectifier diode

• Mounting: Chassis-mount module with insulated baseplate

This module is designed to handle very high current and voltage levels with reliable thermal performance and long operational lifetime.

2. Electrical Characteristics

These ratings allow the module to operate in high-power rectification circuits and heavy industrial converters.

3. Thermal Characteristics

The module requires mounting on a heatsink to dissipate the heat generated by high current conduction.

4. Mechanical Features

• Package Type: Y1 industrial module package

• Dimensions: approx. 92 × 50 × 52 mm

• Weight: approx. 650 g

• Terminal Type: M8 bolt terminals

• Isolation Voltage: about 3600 V between baseplate and terminals

• Mounting Torque: 4.5 – 7 Nm

The baseplate is electrically insulated copper (DCB technology), providing good thermal conduction and electrical isolation.

5. Internal Configuration

The module contains one high-power rectifier diode.

Symbol / internal circuit:

Anode (A)
|
|---->|---- Cathode (K)

Multiple modules are often combined to build single-phase or three-phase bridge rectifiers.

6. Key Features

• Planar passivated semiconductor chips

• Very low forward voltage drop

• Low leakage current

• Excellent thermal cycling capability

• High surge current tolerance

• Electrically isolated baseplate for easy mounting

These features ensure high reliability in industrial power systems.

7. Typical Applications

The MDO600-16N1 diode module is widely used in:

• Industrial rectifier systems

• DC motor drives

• PWM inverter input rectifiers

• UPS power supplies

• Battery chargers

• DC power equipment

• High-current power supplies                                                                             

�� Product Overview

The HAT 1200‑S is an open‑loop Hall‑effect current transducer designed for accurate measurement of AC, DC, and pulsed currents with galvanic isolation between the monitored conductor (primary) and the electronics (secondary). It provides a proportional analogue voltage output and is widely used in industrial applications such as motor drives, power supplies, UPS systems, renewable energy inverters and welding power units.

�� Operating Principle

• Open‑Loop Hall Effect: Senses the magnetic field created by the primary current using a Hall sensor.

• Galvanic Isolation: Primary current path is electrically isolated from the output circuitry, improving safety and noise immunity.

• Analogue Output: Produces a voltage proportional to the sensed current.

• Bidirectional Measurement: Detects both positive and negative current direction with equal sensitivity.

⚙️ Electrical Specifications �� Performance & Accuracy

• Accuracy: ±1 % of nominal current at 25 °C (excluding offset)

• Linearity Error: ≤ ±1 % over ±IPN

• Offset Voltages:

  • Electrical offset: < ±20 mV

  • Hysteresis offset (after excursion): < ±10 mV

• Temperature Coefficients:

  • Output drift < ±0.05 %/K

  • Offset drift < ±1 mV/K (–40 to +80 °C)

• Response Time: < 5 µs to reach 90 % of final value

��️ Mechanical & Environmental

• Operating Temperature Range: –40 °C to +105 °C

• Mounting Type: Panel / chassis mount

• Case Material: Insulating plastic casing compliant with UL 94‑V0 flammability rating

• Weight: Approx. 245 g (varies by variant)

��️ Typical Applications

Ideal for high‑current measurement and monitoring in:
✔ Motor drives and control systems
✔ Switched‑mode power supplies (SMPS)
✔ Variable speed AC drives
✔ Uninterruptible Power Supplies (UPS)
✔ Battery energy systems and renewable inverters
✔ Welding power supply monitoring                                                                                      

1. General Overview

• Part Number: MCC162‑16IO1
• Manufacturer: IXYS (Littelfuse / IXYS‑Electronics)
• Module Type: Dual SCR (thyristor) + diode phase‑leg power module
• Topology: Series SCR & diode forming a half‑bridge rectifier leg
• Package Style: Y4‑M6 chassis mount industrial module

👉 Commonly used in AC→DC controlled rectifiers, phase‑angle power controllers, soft starters, etc., where line‑frequency control (50/60 Hz) is required.

2. Electrical Characteristics 📌 Voltage Ratings

• Repetitive Peak Off‑State Voltage (VDRM / VRRM): 1600 V
• Isolation Test Voltage: Typically high (module isolation ≥4000 V AC)

⚡ Current Ratings

• Average Forward Current (IT(AV)) ≈ 180–200 A (TC = 85 °C typical)
• RMS On‑State Current (IT(RMS)) ≈ ~300 A
• Non‑Repetitive Surge Current (ITSM): ~6000–6400 A (10 ms pulse)

3. SCR + Diode Pair Behavior

The MCC162‑16IO1 module includes:

🧱 SCR (Thyristor)

• Controlled switch: conducts when forward‑biased and a gate trigger is applied.
• Once triggered, remains on until current falls below holding value (e.g., AC zero crossing).
• Gate Trigger Voltage (VGT max): ~2.5 V typical.
• Gate Trigger Current (IGT max): ~150 mA typical.
• Holding Current (IH): ~100–200 mA.

🔁 Freewheeling Diode

• Provides the return current path for the complementary half cycle.
• Reduces power dissipation by allowing current to continue flowing when SCR is off.

✔ This SCR + diode pair forms the basic element for controlled rectification — each pair can be used in multi‑phase rectifiers by connecting multiple modules.

4. Thermal & Mechanical Details

• Operating Junction Temperature (TJ): −40 °C to +125 °C
• Thermal Resistance (junction‑to‑case): ~0.14–0.16 K/W
• Thermal Resistance (case‑to‑heatsink): ~0.05–0.08 K/W

📦 Mechanical Package

• Package: Y4‑M6 chassis mount module with screw/bolt terminals
• Baseplate: Electrically isolated for mounting to heatsinks
• Dimensions: ~94 × 34 × 30 mm (approx.)

The module’s isolated baseplate makes thermal management easier when mounting to heatsinks or power chassis.

5. Functional Operation 🟢 SCR (Controlled Switch)

• Triggering: Gate trigger when SCR is forward biased
• Turn‑off: Occurs only when current drops below holding current (natural AC zero crossing)
• No active turn‑off like IGBTs or MOSFETs.

🔁 Diode (Freewheel Path)

• Allows current to flow during periods when the SCR is not conducting, reducing ripple and stress on components.

✔ Together they form a controlled rectifier leg.

6. Typical Applications

The MCC162‑16IO1 module is used in:

• Single‑phase or multi‑phase controlled rectifiers
• AC soft‑starters (motor control)
• Phase‑angle controlled power regulators
• DC link supply generation (industrial drives)
• AC motor drives with line‑frequency control
• Power supplies and industrial converters

We are engaged in offering Mdo500-16N1 IGBT Modules to our clients. Our range of all products is widely appreciated by our clients.

📌 Overview

The HAT 800‑S is part of LEM’s HAT Series of open‑loop Hall effect current transducers that measure electrical currents (AC, DC, or pulsed) while providing galvanic isolation between the primary high‑current path and the secondary measurement electronics.

🔧 Operating Principle

• Open‑loop Hall Effect Technology: The sensor uses a Hall effect element to detect the magnetic field generated by current flowing through the primary conductor, and outputs a proportional analog voltage signal.

• Galvanic Isolation: The design inherently isolates the primary high‑power side from the secondary electronics, improving safety in measurement systems.

• Voltage Output: Analog output signal represents the instantaneous current proportional to the primary current flow.

📊 Key Technical Specifications 🧠 Functional Characteristics Open‑Loop Hall Effect

• Offers a good balance between performance and cost for general industrial current sensing.

• Fast response and wide bandwidth allow tracking dynamic current changes in PWM and drive systems.

Analog Output

• The output spans approximately –4 V to +4 V at ±800 A primary current, proportional to the instantaneous measured current.

• The analog nature makes it compatible with ADCs or measurement systems capable of handling bipolar voltage inputs.

📡 Electrical & Safety Considerations

• Galvanic Isolation: Primary circuit is isolated from measurement electronics, enhancing safety in high‑power systems.

• Insulation Resistance: Typically >1000 MΩ @ 500 V DC (based on series datasheet figures).

• UL 94‑V0 Plastic Housing: Insulating case meets industrial flammability ratings.

• Compliance: Designed to meet safety and industrial standard norms (e.g., EN 50178 and UL 508, depending on region/version).

🛠️ Typical Applications

Ideal in systems requiring isolated current sensing in medium‑power environments:

• AC/DC/servo drives and motor controls

• Switch‑mode power supplies (SMPS) and UPS systems

• Battery and inverter systems

• Welding power sources

• Renewable energy converters (solar/wind)

📘 Product Overview

The LF 505‑S/SP27 is a closed‑loop Hall‑effect current transducer designed for accurate electronic measurement of AC, DC, and pulsed currents with galvanic isolation between the primary high‑power circuit and the low‑power secondary output. It is suitable for industrial applications such as motor drives, power converters, UPS systems, and battery‑supplied equipment.

🔌 Key Electrical Specifications Primary and Sensing

• Primary nominal RMS current (Ipn): 500 A — rated continuous current capability of the sensor.

• Primary measuring range (Ip): 0 … ±1480 A — bidirectional measurement range when supplied at ±24 V.

• Sensing technology: Closed‑loop compensated Hall‑effect — active flux compensation provides high accuracy and linearity.

• Turns ratio (Kn): 1 : 5000 — relates primary current to secondary output current.

Secondary and Output

• Output type: Proportional current output — the transducer provides a current on the secondary proportional to the measured primary current.

• Secondary nominal RMS current (Isn): 100 mA at rated primary current.

• Secondary measuring/burden: The secondary current is typically converted to a voltage signal using an external burden resistor sized per application needs.

Supply & Performance

• Supply voltage: ±24 V DC (±5 %) — bipolar DC supply powers the internal electronics.

• Current consumption: ~33 mA + Isn typical.

• Accuracy: ~±0.6 % at nominal current at 25 °C.

• Linearity error: < 0.1 % typical.

• Response time: < 1 µs (to 90 % of final value).

• Frequency bandwidth: DC to ~100 kHz (–1 dB).

• di/dt capability: > 200 A/µs — can follow fast current changes.

🌡️ Environmental & Safety Ratings

• Ambient operating temperature: –40 °C … +70 °C.

• Ambient storage temperature: –40 °C … +85 °C.

• Isolation: Galvanic between primary and secondary with a plastic case recognized to UL 94‑V0 for safety.

🧩 Mechanical & Mounting

• Mounting type: Panel / chassis mount with a single pass‑through aperture for the primary conductor.

• Mass: Approx. 230 g — compact and rugged for industrial use.

• Secondary connection: Typically via a small connector (e.g., JST) for easy wiring.

⚙️ Functional Highlights

• Galvanic isolation ensures safe sensing in high‑power environments.

• Closed‑loop Hall‑effect sensing gives low offset, good linearity, and stable performance over temperature.

• Fast dynamic response handles pulsed and rapidly changing currents.

• Wide bandwidth makes it suitable for both steady and high‑frequency current components.

📌 Typical Applications

• Variable‑speed motor drives and servo systems

• Power inverters and converters

• Battery‑based power systems and UPS

• Welding power supplies and heavy industrial loads

• Current protection and control electronics

1. General Overview

• FS300R12KE3-AGDR76C is a high-power IGBT module + gate driver system used in industrial power electronics.

• It consists of:

  • FS300R12KE3 → IGBT power module (by Infineon Technologies)

  • AGDR76C → Intelligent gate driver unit (commonly used in ABB drive systems)

2. IGBT Module (FS300R12KE3) Overview

• Type: Six-pack IGBT module (3-phase inverter)

• Technology: Trench Field Stop (IGBT3 / E3 generation)

• Package: EconoPACK™+

Key Ratings

• Collector-Emitter Voltage (V_CES): 1200 V

• Nominal Current (I_C): 300 A

• Peak current capability: up to ~500 A (device limit)

• VCE(sat): ~1.7–2.1 V (typical)

Configuration

• 6 IGBTs + 6 freewheeling diodes

• Arranged as a three-phase bridge inverter

3. Gate Driver (AGDR76C) Overview

• Dedicated intelligent gate driver board for high-power IGBT modules

• Provides:

  • Gate control (PWM switching)

  • Protection functions

  • Signal isolation

Typical Driver Features

• Gate drive voltage: ±15 V

• Input: PWM control signals

• Feedback: fault/status signals

• External supply: ~24 V DC

4. Protection Functions (Driver Integrated)

The AGDR76C typically includes:

• Desaturation (short-circuit) protection

• Overcurrent protection

• Under-voltage lockout (UVLO)

• Overtemperature monitoring (via NTC)

• Fault signaling to controller

�� These features are essential for protecting the IGBT during:

• Short circuits

• Overload conditions

• Switching faults

5. Electrical Characteristics (System Level) IGBT Section

• Voltage rating: 1200 V

• Current rating: 300 A

• Switching frequency: up to ~15–20 kHz

• Gate-emitter voltage: ±20 V max

Thermal Characteristics

• Junction temperature (Tj max): up to 150 °C

• Thermal resistance (RthJC): ~0.08–0.12 K/W

• Requires:

  • Heatsink + forced air or liquid cooling

6. Mechanical Features

• Package: EconoPACK+ (compact high-power module)

• Mounting: Screw-mounted to heatsink

• Isolation voltage: 2.5–4 kV AC

7. Functional Operation

1. DC input is applied to the IGBT module

2. AGDR76C driver supplies gate signals

3. IGBTs switch in PWM mode

4. Output becomes 3-phase AC voltage

 

8. Applications

• Industrial motor drives (VFDs)

• Renewable energy inverters (solar/wind)

• Traction systems

• UPS systems

• Heavy industrial automation (steel, mining, marine)

1. General Overview

• FS225R12KE3-AGDR71C is a high-power IGBT inverter module system

  • FS225R12KE3 → IGBT power module (by Infineon Technologies)

  • AGDR71C → intelligent gate driver board (ABB drive systems)

👉 It forms a complete power switching unit used in:

• Industrial drives

• Power converters

• Medium-power inverter systems

2. IGBT Module (FS225R12KE3)

• Type: Six-pack IGBT module (3-phase inverter bridge)

• Technology: TRENCHSTOP™ IGBT3 (E3 generation)

• Package: EconoPACK™+ B

• Includes:

  • 6 IGBTs

  • 6 freewheeling diodes

  • NTC temperature sensor

Key Electrical Ratings

• Collector-Emitter Voltage (V_CES): 1200 V

• Nominal Collector Current (I_C): 225 A

• Peak Collector Current (I_CM): ~450 A

• Gate-Emitter Voltage (V_GE): ±20 V

Switching Characteristics

• Designed for:

  • Low switching losses

  • Medium-frequency PWM operation

• Switching frequency: up to ~20 kHz (depending on cooling)

3. Thermal & Mechanical Characteristics

• Max junction temperature (Tj): up to 150 °C

• Thermal resistance (RthJC): ~0.08–0.11 K/W

• Power dissipation: ~1150 W

• Isolation voltage: ~2.5 kV

Mechanical Features

• Housing: EconoPACK™+

• Mounting: Screw mounting to heatsink

• Weight: ~0.9 kg

• Low stray inductance (~20 nH) → improved switching performance

4. Gate Driver (AGDR71C) Overview

• AGDR71C is an intelligent gate driver board designed for high-power IGBT modules.

• Specifically matched to:

  • 1200 V class IGBT modules

  • Medium-to-high current applications

Driver Features

• Gate drive voltage: typically ±15 V

• Input signals: PWM (logic level ~5 V)

• Integrated DC/DC supply

• Fast switching response (~µs range)

Protection Functions

• Desaturation protection (short-circuit detection)

• Overcurrent protection

• Under-voltage lockout (UVLO)

• Overtemperature monitoring (via NTC)

• Fault feedback output to controller

5. System-Level Characteristics

 (FS225R12KE3 + AGDR71C):

• Cooling: heatsink + forced air / liquid cooling

• Switching frequency: typically up to 12–20 kHz

6. Functional Operation

1. DC bus voltage applied to module

2. AGDR71C driver provides gate pulses

3. IGBTs switch in PWM mode

4. Output → 3-phase AC voltage

7. Applications

• Industrial motor drives (VFDs)

• UPS systems

• Solar and wind inverters

• Welding and induction heating systems

• Automation and heavy industry

1. General Overview

The FF1400R12IP4 is a high-power dual IGBT module designed for demanding industrial power conversion systems.

• Manufacturer: Infineon Technologies

• Voltage class: 1200 V

• Current rating: 1400 A

• Configuration: Half-bridge (dual IGBT)

• Package: PrimePACK™ 3

📌 It integrates 2 IGBTs + 2 anti-parallel diodes, forming a half-bridge inverter leg.

2. Key Electrical Specifications

 

3. Internal Configuration Half-Bridge Topology

The module includes:

• 1 high-side IGBT

• 1 low-side IGBT

• 2 freewheeling diodes (anti-parallel)

• Integrated NTC thermistor

👉 Used as a single inverter leg, multiple modules can be combined to form:

• 3-phase inverters

• full bridge converters

4. Technology Features TRENCHSTOP™ IGBT4 (P4 Technology)

• Low conduction losses (low VCE(sat))

• Improved switching performance

• High current density

Emitter Controlled Diode (EmCon4)

• Soft recovery characteristics

• Reduced switching losses and EMI

• Improved efficiency

📌 The module provides high DC stability and strong short-circuit capability.

5. Thermal & Mechanical Characteristics

 

6. Mechanical & Packaging Features

• PrimePACK™ 3 housing

• Copper baseplate (excellent heat dissipation)

• Low stray inductance design

• High creepage and clearance distances

• Integrated NTC temperature sensor (~5 kΩ @ 25°C)

7. Key Features

• Very high current capability (1400 A)

• Low conduction and switching losses

• High short-circuit ruggedness (~10 µs)

• Positive temperature coefficient → easy paralleling

• High reliability in heavy-duty applications

• Excellent thermal performance

8. Applications

• High-power motor drives

• Wind turbine converters

• Solar inverters (PV systems)

• Traction systems (rail / EV)

• UPS systems

• Industrial power converters

📌 General Description

The LF1005‑S/SP16 is a closed‑loop Hall‑effect current transducer designed for electronic measurement of AC, DC, and pulsed currents with high accuracy and fast response. It provides galvanic isolation between the high‑power primary circuit and the secondary measurement/output circuit, which enhances safety and protects connected electronics.

Closed‑loop Hall transducers like this one maintain precise measurement across wide current ranges thanks to active compensation of magnetic flux, yielding better linearity and dynamic performance than basic open‑loop designs.

📘 Key Technical Specifications 🔌 Electrical Characteristics

• Measurement Principle: Closed‑loop compensated Hall effect transducer

• Primary Nominal RMS Current (Ipn): 1000 A

• Measuring Range: 0 … ±2100 A (depending on supply voltage)

• Turns / Ratio: 1 : 5000

• Supply Voltage (Vcc): ±15 V … ±24 V (±5 %)

• Secondary Nominal RMS Current (Isn): 200 mA

• Measuring Resistance (Rm): Varies with current & supply; typical ranges from ~0 to ~60 Ω depending on conditions

📊 Performance

• Overall Accuracy (at Ipn, 25 °C): approx. ±0.4 %

• Linearity Error: < 0.1 %

• Response Time (to 90 % of final output): < 1 µs

• Frequency Bandwidth: DC … 150 kHz

• di/dt Capability: Can accurately follow > 100 A/µs changes

🌡️ Environmental & Physical

• Operating Ambient Temperature: –40 °C … +85 °C

• Storage Temperature: –50 °C … +90 °C

• Insulation Test Voltage: 3 kV RMS @ 50 Hz, 1 min

• Creepage / Clearance & Tracking: Designed to meet safety standards (e.g., EN 50178/IEC 61010‑1) for reinforced/basic insulation, with adequate distances between primary and secondary circuits

• Mass: ~500 g (varies by packaging)

• Case Material: Insulated plastic (UL 94‑V0)

⭐ Functional Highlights

✅ Galvanic Isolation
Provides safe separation of the high current path from the electronic circuits, suitable for industrial power control and monitoring systems.

✅ High Linearity & Accuracy
Excellent precision across broad current ranges minimizes measurement errors, enabling reliable control feedback.

✅ Fast Response & Wide Bandwidth
Can track rapid current changes, making it suited for servo drives, power converters, UPS systems, and other fast‑acting control applications.

✅ Robust Thermal Performance
Operates reliably over a wide temperature range and has low thermal drift.

📌 Typical Applications

• Variable frequency drives and servo motor systems

• Static DC motor converters

• Battery‑based systems and UPS

• Power supplies and welding equipment

• Renewable energy inverters and traction systems

We are engaged in offering Fs500R17Oe4D Igbt to our clients. Our range of all products is widely appreciated by our clients.

1. General Overview

The FS225R17KE3 is a high-voltage, medium–high current IGBT power module designed for industrial inverter and drive applications.

• Manufacturer: Infineon Technologies (EUPEC series)

• Voltage class: 1700 V

• Current rating: 225 A

• Configuration: Six-pack (3-phase inverter)

• Package: EconoPACK™+ / EconoPACK™+ B

📌 It integrates 6 IGBTs + 6 anti-parallel diodes, forming a complete three-phase inverter bridge.

2. Key Electrical Specifications

 

3. Internal Configuration Six-Pack (3-Phase Bridge Topology)

The module includes:

• 3 high-side IGBTs

• 3 low-side IGBTs

• 6 freewheeling diodes (anti-parallel)

• Integrated NTC thermistor (temperature sensing)

 

4. Technology Features Trench / Field-Stop IGBT3 (E3 Technology)

• Low conduction losses

• Reduced switching losses

• High efficiency at medium switching frequencies

Emitter Controlled Diode (EmCon)

• Soft recovery behavior

• Reduced EMI and switching stress

• Improved system reliability

5. Thermal & Mechanical Characteristics

 

6. Mechanical & Packaging Features

• EconoPACK™+ housing

• Copper baseplate for efficient heat dissipation

• Solder pin terminals

• Low stray inductance design

• High creepage and clearance distances

• Integrated thermal sensor (NTC)

7. Key Features

• High voltage capability (1700 V class)

• High current handling (225 A)

• Low saturation voltage → reduced conduction loss

• Fast switching performance

• High short-circuit withstand (~10 µs typical)

• Excellent thermal performance

• High reliability under harsh industrial conditions

 

8. Applications

• Industrial motor drives (VFDs)

• Wind and solar inverters

• UPS systems

• Rail traction systems

• Industrial automation converters

AFIN-01C ABB Solar Card  used   in abb solar  drive  acs800

• Charging TypeAC
• BrandABB
• Board TypeDouble layered
• Compatible Inverter Brandabb

We are engaged in offering  Lf505-S/Sp13 Current Transducer to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering 5SHX1060H0003 IGCT ABB to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering Sdcs Pow4 Sd Dcs800 Abb Card to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering B43586-S3468-Q3 EPCOS Capacitor to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering B43586S3468Q1 Capacitors to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering B43586-S3468-Q3 EPCOS Capacitor to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering B43586S3468Q1 Epcos Capacitors to our clients. Our range of all products is widely appreciated by our clients.

Analogue and digital I/O channels are utilised in ACS800 Motor Drive applications for many objectives, including control, monitoring, and measurement (e.g. motor temperature). With the RDCU-12C, you can increase the analogue and digital I/O connections, relay outputs, and other I/O capabilities of your ACS800 Drive. RDCU-12C; CONTROL UNIT DISCLAIMER: The product pictures displayed are merely meant to serve as examples and might not be a true depiction of the item. ABB retains the right, without prior notice, to alter product specifications and pictures.

Get best price of ABB RDCU-12C VFD at ₹160000 /-

We are engaged in offering Sdcs Pin48 Abb Dcs800 Card to our clients. Our range of all products is widely appreciated by our clients.

We "Sanghvi Electronics" having wide range of with the quality are Leading Suppliers of SDCS CON4 ABB DCS800

We are engaged in offering B43586S3468Q3 Power Capacitors to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering 5Stp24H2800 Abb Thyristors to our clients. Our range of all products is widely appreciated by our clients.

APBU-44C Branching & Dataloggers ABB Acs800

APBU-44C 4X KIT. General Information. Global Commercial Alias: APBU-44C 4X KIT. Product ID: 68242371. ABB Type Designation: Branching unit kit ...